惯性导航设备升沉数据测试系统研究

研制了一套基于STM32单片机与单轴摇摆台的测试系统,利用固定圆心、固定半径条件下的圆内三角形关系,通过拉线传感器采集单轴摇摆台复合运动中的升沉数据;同时,对惯性导航设备输出的升沉数据进行采集与处理。对测试系统输出的升沉数据进行了验证,实验结果表明:该测试系统的测试数据准确合理,可实现对惯性导航设备升沉参数的动态测试,弥补了现有同类测试系统的结构复杂、量程小等不足。     

A series of Er~(3+)-activated SrLaGa_3O_7 single crystal fibers for mid-infrared laser application

A multidisciplinary approach for the production and characterization of a series of high concentration Er~(3+)activated SrLaGa_3 O_7(abbreviated as Er:SLGO) crystal fibers is shown to have a great promise for implementation in mid-infrared laser applications.The current approach includes the design and formation of unique layered tetrahedral network structures with several kinds of rare earth(RE) ions including Er ions distributing statistically between layers,such as Er:SLGO,Er,Nd:SLGO,Er,Yb,Ho:SLGO,Er,Eu:SLGO and Er,Ho:SLGO.Five kinds of Er:SLGO crystal fibers were designed to grow via a micropulling down method.Spectroscopic analyses show that Er,Yb,Ho:SLGO and Nd,Er:SLGO crystal fibers were superiorly endowed with inhomogeneous broadening absorption and strong emission.The unique structural components design enables the generation of improved absorption and emission recombination,and the inhibition of self-termination as well.Generally,the use of structural components design may warrant high-efficiency emissions in RE-doped crystal fibers.     

极端电场环境激励下的VO2相变性能研究与应用

为揭示VXOY薄膜场致相变规律,推广钒氧化物应用于卫星控制系统,指导氧化钒规模制备,将磁控溅射法和真空退火工艺相结合,在Al2O3陶瓷基片上制备出VXOY薄膜,降低了实验对仪器精度的要求,提高了实验的成功率。对基片进行磁控溅射镀膜,在管式炉中进一步氧化处理生成表面均匀的V2O5,然后进行高温退火处理,对不同退火条件下的生成的薄膜进行了XRD表征。测得了电场激励下VXOY薄膜的相变现象,验证了电场激励下焦耳热并非薄膜相变的主导因素;总结了不同组分下VXOY薄膜的相变规律,研究了不同V6O13含量对VO2薄膜临界相变电压的影响规律,可指导VXOY薄膜应用于微纳卫星等极端环境下的设备控制系统。     

电弧离子镀NiAlHf涂层的抗高温氧化性能

目的通过电弧离子镀技术,获得抗氧化性能优良的NiAl涂层。方法采用电弧离子镀技术,在弧流为110 A,偏压为-50 V的参数下沉积NiAlHf涂层。通过X射线衍射仪(XRD)和扫描电子显微镜(SEM)对涂层的物相结构和形貌进行分析,通过能谱仪(EDS)分析涂层的成分。采用恒温氧化增重实验对涂层的氧化动力学进行分析。结果由电弧离子镀技术制备的NiAl涂层致密均匀,无大颗粒、孔洞等缺陷。涂层主要由β-NiAl相组成,活性元素Hf固溶在主相中。NiAlHf涂层表现出良好的抗高温氧化性能,动力学曲线符合抛物线规律,在1150℃下恒温氧化200h的平均氧化速率为0.0841g/(m^2×h),远优于传统MCrAlY涂层体系。NiAlHf涂层在氧化初期形成保护性的α-Al2O3氧化皮以及少量亚稳态的θ-Al2O3,随后θ-Al2O3逐渐转变为稳态的α-Al2O3。Hf在涂层表面富集从而形成HfO2,对氧化皮形成了钉扎作用,增强了氧化皮的粘附性,提高了涂层的抗氧化性能。随着氧化的进行,涂层中的β-NiAl相逐渐转变为γ'-Ni3Al相。结论 NiAlHf涂层在1150℃下仍具备优良的抗高温氧化性能,对下一代耐更高温度涂层开发,电弧离子镀NiAl涂层的技术推广及工业化应用有一定的指导作用。     

含La2O3奥氏体不锈钢堆焊合金层晶粒细化机制及对其耐腐蚀、磨损性能的影响

目的 通过在超低碳Cr19Ni10不锈钢堆焊合金中加入稀土氧化物La2O3，细化其微观组织，获得力学性能、耐腐蚀性能和耐磨性能等综合性能优良的堆焊合金层。方法 采用添加La2O3的超低碳Cr19Ni10不锈钢焊条制备了四种不锈钢堆焊合金。采用X射线荧光光谱、红外碳硫分析仪和X射线衍射分析仪，对堆焊合金层的元素组成和相组成进行了测定。采用金相显微镜和晶粒度统计软件，对堆焊合金层的微观组织形貌进行观察，并对晶粒度进行了统计分析。采用显微维氏硬度计和纳米压痕仪对堆焊合金层的硬度和杨氏模量进行了测定。采用电化学工作站和CSM摩擦磨损试验机对堆焊合金层的耐腐蚀性能和耐磨性能进行了评价，并且采用白光共聚焦显微镜对磨损后的磨痕形貌和尺寸进行了观察和测定。采用二维晶格错配度理论，对La2O3/γ-Fe界面间的晶格错配关系进行了计算。结果 在堆焊合金层中加入La2O3，随着La2O3加入量的增加，堆焊合金层奥氏体晶粒细化越明显。当La2O3的添加量由0%增加至1.5%时，奥氏体晶粒平均面积由400 μm²减少为210 μm²。堆焊合金层加入La2O3，可以明显提高其力学性能、耐腐蚀性能和耐磨损性能。当La2O3的添加量由0%增加至1.0%时，堆焊合金层的微观硬度由180HV增加到225HV，宏观硬度由125HBS增加到150HBS，杨氏模量由186 GPa左右增加到217 GPa，腐蚀电位由?0.4 V增加到?0.25 V，磨痕深度由50 μm减小到10 μm。La2O3(001)面和γ-Fe(110)面的二维晶格错配度为8.7%(<12%)，说明La2O3可以作为γ-Fe的中等有效异质形核基底，从而细化了堆焊合金层中的奥氏体晶粒。结论 La2O3可以有效地细化奥氏体晶粒，改善堆焊合金层的力学性能，提高其耐腐蚀和耐磨损性能。但是，La2O3加入量存在一个最佳值，当La2O3的加入量为1.0%时，堆焊合金层的综合性能最好。     

Microstructure and shear strength of γ-TiAl/GH536 joints brazed with Ti−Zr−Cu−Ni−Fe−Co−Mo filler alloy

The influence of brazing temperature and brazing time on the microstructure and shear strength of γ-TiAl/GH536 joints brazed with Ti−Zr−Cu−Ni−Fe−Co−Mo filler was investigated using SEM, EDS, XRD and universal testing machine. Results show that all the brazed joints mainly consist of four reaction layers regardless of the brazing temperature and brazing time. The thickness of the brazed seam and the average shear strength of the joint increase firstly and then decrease with brazing temperature in the range of 1090−1170 °C and brazing time varying from 0 to 20 min. The maximum shear strength of 262 MPa is obtained at 1150 °C for 10 min. The brittle Al₃NiTi₂ and TiNi₃ intermetallics are the main controlling factors for the crack generation and deterioration of joint strength. The fracture surface is characterized as typical cleavage fracture and it mainly consists of massive brittle Al₃NiTi₂ intermetallics.     

贵州水晶葡萄病原真菌分离鉴定及室内抑菌活性测试

[目的]确定引起贵州水晶葡萄采后贮藏病害的病原真菌种类及室内筛选用于该病害的主要防治杀菌剂。[方法]对病原菌进行分离纯化鉴定,通过科赫法则确定致病菌种类;筛选12种商品杀菌剂对炭疽病菌进行抑菌活性测定,筛选出有效药剂,为防治该病害提供一定的理论依据。[结果]从贵州省凯里市水晶葡萄采后贮藏病害分离鉴定出3株病原菌,为青霉菌(Penicillium sp.)、炭疽病菌(Clletotrichum gloeosporioides)和链格孢菌(Alternaria sp.),采用科赫法则,对3株病原真菌进行刺伤回接,发现3株均为水晶葡萄在贮藏过程中的主要致病菌。12种杀菌剂对水晶葡萄炭疽病菌进行室内抑菌活性测试结果表明:均具有较好的抑制活性,其中50%咯菌腈WP、50%苯菌灵WP、42%噻菌灵SC和43%戊唑醇SC对水晶葡萄炭疽病菌抑制活性最好,其EC50值分别为0.1024、0.1386、0.1624、0.1974 mg/L。[结论]凯里水晶葡萄采后病害病菌为青霉菌、炭疽病菌和链格孢菌;筛选出12种药剂针对水晶葡萄采后病害炭疽病菌的药剂,其中50%咯菌腈WP对炭疽病菌具有较好抑制效果,为水晶葡萄采后贮藏病害防治提供理论基础。     

Effects of yttrium on wettability and interactions between molten superalloy and SiO2-based ceramic core

In order to obtain high-quality superalloy castings, the wettability and interactions between superalloy melts with various Y contents and SiO₂-based ceramic cores were investigated at 1823 K. The results indicated that the wettability and interface reactions were affected by the content of Y in the alloy. For the alloys with Y content less than 0.011 wt%, no Y-oxide was found at the interface, but HfO₂, Al₂O₃ and ZrO₂ phases were formed, and the wetting angle dropped slightly. However, different Y-oxides precipitated at the alloy-ceramic interface for the alloys with Y content more than 0.017 wt%, and the wetting angle dropped sharply. When the content of Y was 0.017 and 0.025 wt%, Al₂O₃, Y₃Al₂(AlO₄)₃, HfO₂ and ZrO₂ phases were formed at the interface. When the content of Y was 0.1 wt%, YAlO₃, Y₃Al₅O₁₂, Y₄Al₂O₉, HfO₂ and ZrO₂ phases were formed. The formation of different reaction products was mainly caused by the change of Y activity (a_Y) in the alloy. The reaction between Y and SiO₂ could improve the wettability of the system apparently.     

基于STM32单片机的大学生体能监测仪设计与实现

体能监控仪作为生命体征监测设备,对于辅助大学生完成体能训练有很大帮助;基于STM32单片机技术,设计开发集成了多种传感器的一种大学生体能监测装备,它能够有效的检测包括心率检测、人体的步数、运动圈速、消耗卡路里等信息;该设计采用了STM32作为主控芯片,采用模块化的设计思路;在系统硬件设计方面,设计了包括STM32控制系统、心率获取电路、三轴传感器电路、显示电路以及按键电路等;同时将软件模块拆分成了初始化子程序、心率获取子程序,步数获取子程序,显示子程序等;Proteus仿真结果显示,使用STM32单片机技术设计的体能监测系统,能够运行稳定,测量心率范围60次/min~180次/min,可在心率异常时报警,同时检测步数的准确率达98%,满足体能监测任务需要,实验结果符合预期;为STM32单片机在体育运动研究信息化中应用提供参考。     

Grain size effect on cyclic deformation behavior and springback prediction of Ni-based superalloy foil

In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior, cyclic loading–unloading and shearing tests were performed on the superalloy foils with 0.2 mm in thickness and diverse grain sizes. The results show that, the decline ratio of elastic modulus is weakened with increasing grain size, and the Bauschinger effect becomes evident with decreasing grain size. Meanwhile, U-bending test results determine that the springback is diminished with increasing grain size. The Chaboche, Anisotropic Nonlinear Kinematic (ANK) and Yoshida-Uemori (Y-U) models were utilized to fit the shear stress–strain curves of specimens. It is found that Y-U model is sufficient of predicting the springback. However, the prediction accuracy is degraded with increasing grain size.